Welcome to the VanDyke Software Forums

Join the discussion today!


Go Back   VanDyke Software Forums > General

Reply
 
Thread Tools Display Modes
  #1  
Old 05-31-2018, 03:06 AM
rualexy rualexy is offline
Registered User
 
Join Date: May 2018
Posts: 2
Connect with SSH1 problem

How do you do!
I have 8.3.3.1646 version. I configure profile to connect switch by SSH1 protocol. When conneting to him, it write, that i try to connect by SHH2 protocol. It can't accept my connection.
How to resolve this problem?

Here my profile config:
Code:
S:"Username"=myusername
S:"Password V2"=
S:"Login Script V3"=02:............
D:"Session Password Saved"=00000000
S:"Local Shell Command Pre-connect V2"=02:...........
S:"Monitor Username"=
S:"Monitor Password V2"=02:..............
B:"Normal Font v2"=00000060
 f1 ff ff ff 00 00 00 00 00 00 00 00 00 00 00 00 90 01 00 00 00 00 00 cc 03 02 01 31 43 00 6f 00
 6e 00 73 00 6f 00 6c 00 61 00 73 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 6e 00 00 00
B:"Narrow Font v2"=00000060
 f3 ff ff ff 00 00 00 00 00 00 00 00 00 00 00 00 90 01 00 00 00 00 00 01 00 00 00 01 4c 00 75 00
 63 00 69 00 64 00 61 00 20 00 43 00 6f 00 6e 00 73 00 6f 00 6c 00 65 00 00 00 00 00 00 00 00 00
 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 61 00 00 00
D:"Use Narrow Font"=00000000
S:"SCP Shell Password V2"=02:.........
S:"PGP Upload Command V2"=02:.........
S:"PGP Download Command V2"=02:...........
D:"Is Session"=00000001
S:"Protocol Name"=SSH1
D:"Request pty"=00000001
S:"Shell Command"=
D:"Use Shell Command"=00000000
D:"Force Close On Exit"=00000000
D:"Forward X11"=00000000
S:"XAuthority File"=
S:"XServer Host"=127.0.0.1
D:"XServer Port"=00001770
D:"XServer Screen Number"=00000000
D:"Enforce X11 Authentication"=00000001
D:"Request Shell"=00000001
D:"Max Packet Size"=00001000
D:"Pad Password Packets"=00000001
S:"Sftp Tab Local Directory V2"=${VDS_USER_DATA_PATH}
S:"Sftp Tab Remote Directory"=
S:"Hostname"=1.2.3.4
S:"Firewall Name"=None
D:"Allow Connection Sharing"=00000000
D:"Disable Initial SFTP Extensions"=00000000
D:"[SSH2] Port"=000008ae
S:"Key Exchange Algorithms"=ecdh-sha2-nistp521,ecdh-sha2-nistp384,ecdh-sha2-nistp256,diffie-hellman-group14-sha1,diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,gss-group1-sha1-toWM5Slw5Ew8Mqkay+al2g==,gss-gex-sha1-toWM5Slw5Ew8Mqkay+al2g==
D:"Use Global Host Key Algorithms"=00000001
S:"Host Key Algorithms"=ssh-rsa,ssh-ed25519,ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,null,x509v3-sign-rsa,x509v3-ssh-rsa,x509v3-sign-dss,x509v3-ssh-dss,ssh-dss
S:"Cipher List"=aes256-ctr,aes192-ctr,aes128-ctr,aes256-gcm@openssh.com,aes128-gcm@openssh.com,aes256-cbc,aes192-cbc,aes128-cbc,chacha20-poly1305@openssh.com,twofish-cbc,blowfish-cbc,3des-cbc,arcfour
S:"MAC List"=hmac-sha2-512,hmac-sha2-256,hmac-sha1,hmac-sha1-96,hmac-md5,hmac-md5-96,umac-64@openssh.com,umac-128@openssh.com
S:"SSH2 Authentications V2"=publickey,keyboard-interactive,password,gssapi
S:"Compression List"=none
D:"Compression Level"=00000005
D:"GEX Minimum Size"=00000800
D:"GEX Preferred Size"=00000800
D:"Use Global Public Key"=00000001
S:"Identity Filename V2"=
D:"Public Key Type"=00000000
D:"Public Key Certificate Store"=00000000
S:"PKCS11 Provider Dll"=
S:"Public Key Certificate Serial Number"=
S:"Public Key Certificate Issuer"=
S:"Public Key Certificate Username"=
D:"Use Username From Certificate"=00000000
D:"Certificate Username Location"=00000000
D:"Use Certificate As Raw Key"=00000001
S:"GSSAPI Method"=auto-detect
S:"GSSAPI Delegation"=full
S:"GSSAPI SPN"=host@$(HOST)
D:"SSH2 Common Config Version"=00000006
D:"Enable Agent Forwarding"=00000002
D:"Transport Write Buffer Size"=00000000
D:"Transport Write Buffer Count"=00000000
D:"Transport Receive Buffer Size"=00000000
D:"Transport Receive Buffer Count"=00000000
D:"Sftp Receive Window"=00000000
D:"Sftp Maximum Packet"=00000000
D:"Sftp Parallel Read Count"=00000000
D:"Preferred SFTP Version"=00000000
S:"Port Forward Filter"=allow,127.0.0.0/255.0.0.0,0 deny,0.0.0.0/0.0.0.0,0
S:"Reverse Forward Filter"=allow,127.0.0.1,0 deny,0.0.0.0/0.0.0.0,0
D:"Port Forward Receive Window"=00000000
D:"Port Forward Max Packet"=00000000
D:"Port Forward Buffer Count"=00000000
D:"Port Forward Buffer Size"=00000000
D:"Auth Prompts in Window"=00000000
S:"Transfer Protocol Name"=SFTP
S:"Initial Directory"=
D:"Synchronize File Browsing"=00000000
D:"ANSI Color"=00000001
D:"Color Scheme Overrides Ansi Color"=00000001
S:"Emulation"=Xterm
S:"Default SCS"=B
D:"Use Global ANSI Colors"=00000001
B:"ANSI Color RGB"=00000040
 00 00 00 00 a0 00 00 00 00 a0 00 00 a0 a0 00 00 00 00 a0 00 a0 00 a0 00 00 a0 a0 00 c0 c0 c0 00
 80 80 80 00 ff 00 00 00 00 ff 00 00 ff ff 00 00 00 00 ff 00 ff 00 ff 00 00 ff ff 00 ff ff ff 00
D:"Keypad Mode"=00000000
D:"Line Wrap"=00000001
D:"Cursor Key Mode"=00000000
D:"Newline Mode"=00000000
D:"Enable 80-132 Column Switching"=00000001
D:"Ignore 80-132 Column Switching When Maximized or Full Screen"=00000000
D:"Enable Cursor Key Mode Switching"=00000001
D:"Enable Keypad Mode Switching"=00000001
D:"Enable Line Wrap Mode Switching"=00000001
D:"Enable Alternate Screen Switching"=00000001
D:"WaitForStrings Ignores Color"=00000000
D:"SGR Zero Resets ANSI Color"=00000001
D:"SCO Line Wrap"=00000000
D:"Display Tab"=00000000
S:"Display Tab String"=
B:"Window Placement"=0000002c
 2c 00 00 00 00 00 00 00 01 00 00 00 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 1c 00 00 00
 15 00 00 00 dc 02 00 00 4c 02 00 00
D:"Is Full Screen"=00000000
D:"Rows"=00000018
D:"Cols"=00000050
D:"Scrollback"=000001f4
D:"Resize Mode"=00000000
D:"Sync View Rows"=00000001
D:"Sync View Cols"=00000001
D:"Horizontal Scrollbar"=00000002
D:"Vertical Scrollbar"=00000002
S:"Color Scheme"=Traditional
S:"Output Transformer Name"=UTF-8
D:"Use Unicode Line Drawing"=00000001
D:"Blinking Cursor"=00000001
D:"Cursor Style"=00000000
D:"Use Cursor Color"=00000000
D:"Cursor Color"=00000000
D:"Foreground"=00000000
D:"Background"=00ffffff
D:"Bold"=00000000
D:"Map Delete"=00000000
D:"Map Backspace"=00000000
S:"Keymap Name"=Xterm
S:"Keymap Filename V2"=
D:"Use Alternate Keyboard"=00000000
D:"Emacs Mode"=00000000
D:"Emacs Mode 8 Bit"=00000000
D:"Preserve Alt-Gr"=00000000
D:"Jump Scroll"=00000001
D:"Minimize Drawing While Jump Scrolling"=00000001
D:"Audio Bell"=00000001
D:"Visual Bell"=00000000
D:"Scroll To Clear"=00000001
D:"Close On Disconnect"=00000000
D:"Clear On Disconnect"=00000000
D:"Scroll To Bottom On Output"=00000001
D:"Scroll To Bottom On Keypress"=00000001
D:"CUA Copy Paste"=00000000
D:"Use Terminal Type"=00000000
S:"Terminal Type"=
D:"Use Answerback"=00000000
S:"Answerback"=
D:"Use Position"=00000000
D:"X Position"=00000000
D:"X Position Relative Left"=00000001
D:"Y Position"=00000000
D:"Y Position Relative Top"=00000001
D:"Local Echo"=00000000
D:"Strip 8th Bit"=00000000
D:"Shift Forces Local Mouse Operations"=00000001
D:"Ignore Window Title Change Requests"=00000000
D:"Copy Translates ANSI Line Drawing Characters"=00000000
D:"Copy to clipboard as RTF and plain text"=00000000
D:"Translate Incoming CR To CRLF"=00000000
D:"Dumb Terminal Ignores CRLF"=00000000
D:"Use Symbolic Names For Non-Printable Characters"=00000000
D:"Show Chat Window"=00000002
D:"User Button Bar"=00000002
S:"User Button Bar Name"=Default
S:"User Font Map V2"=
S:"User Line Drawing Map V2"=
D:"Hard Reset on ESC c"=00000000
D:"Ignore Shift Out Sequence"=00000000
D:"Use Title Bar"=00000000
S:"Title Bar"=
D:"Show Wyse Label Line"=00000000
D:"Send Initial Carriage Return"=00000001
D:"Use Login Script"=00000000
D:"Use Script File"=00000000
S:"Script Filename V2"=
S:"Script Arguments"=
S:"Upload Directory V2"=C:\Users\admin
S:"Download Directory V2"=C:\Users\admin\Downloads
D:"XModem Send Packet Size"=00000000
S:"ZModem Receive Command"=rz\r
D:"Disable ZModem"=00000000
D:"ZModem Uses 32 Bit CRC"=00000000
D:"Force 1024 for ZModem"=00000000
D:"ZModem Encodes DEL"=00000001
D:"ZModem Force All Caps Filenames to Lower Case on Upload"=00000001
D:"Send Zmodem Init When Upload Starts"=00000000
S:"Log Filename V2"=
S:"Custom Log Message Connect"=
S:"Custom Log Message Disconnect"=
S:"Custom Log Message Each Line"=
D:"Log Only Custom"=00000000
D:"Generate Unique Log File Name When File In Use"=00000001
D:"Log Prompt"=00000000
D:"Log Mode"=00000000
D:"Start Log Upon Connect"=00000000
D:"Raw Log"=00000000
D:"Log Multiple Sessions"=00000000
D:"New Log File At Midnight"=00000000
D:"Trace Level"=00000000
D:"Keyboard Char Send Delay"=00000000
D:"Use Word Delimiter Chars"=00000000
S:"Word Delimiter Chars"=
D:"Idle Check"=00000000
D:"Idle Timeout"=0000012c
S:"Idle String"=
D:"Idle NO-OP Check"=00000000
D:"Idle NO-OP Timeout"=0000003c
D:"AlwaysOnTop"=00000000
D:"Line Send Delay"=00000005
D:"Character Send Delay"=00000000
D:"Wait For Prompt"=00000000
S:"Wait For Prompt Text"=
D:"Wait For Prompt Timeout"=00000000
D:"Send Scroll Wheel Events To Remote"=00000000
D:"Position Cursor on Left Click"=00000000
D:"Highlight Reverse Video"=00000001
D:"Highlight Bold"=00000000
D:"Highlight Color"=00000000
S:"Keyword Set"=<None>
S:"Ident String"=
D:"Raw EOL Mode"=00000000
D:"Eject Page Interval"=00000000
S:"Monitor Listen Address"=0.0.0.0:22
D:"Monitor Allow Remote Input"=00000000
D:"Disable Resize"=00000002
D:"Auto Reconnect"=00000002
B:"Page Margins"=00000020
 00 00 00 00 00 00 e0 3f 00 00 00 00 00 00 e0 3f 00 00 00 00 00 00 e0 3f 00 00 00 00 00 00 e0 3f
B:"Printer Font v2"=00000060
 f3 ff ff ff 00 00 00 00 00 00 00 00 00 00 00 00 90 01 00 00 00 00 00 00 03 02 01 31 43 00 6f 00
 75 00 72 00 69 00 65 00 72 00 20 00 4e 00 65 00 77 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 64 00 00 00
D:"Page Orientation"=00000001
D:"Paper Size"=00000001
D:"Paper Source"=00000007
D:"Printer Quality"=fffffffd
D:"Printer Color"=00000001
D:"Printer Duplex"=00000001
D:"Printer Media Type"=00000001
S:"Printer Name"=
D:"Disable Pass Through Printing"=00000000
D:"Buffer Pass Through Printing"=00000000
D:"Force Black On White"=00000000
D:"Use Raw Mode"=00000000
D:"Printer Baud Rate"=00009600
D:"Printer Parity"=00000000
D:"Printer Stop Bits"=00000000
D:"Printer Data Bits"=00000008
D:"Printer DSR Flow"=00000000
D:"Printer DTR Flow Control"=00000001
D:"Printer CTS Flow"=00000000
D:"Printer RTS Flow Control"=00000001
D:"Printer XON Flow"=00000000
S:"Printer Port"=
S:"Printer Name Of Pipe"=
D:"Use Printer Port"=00000000
D:"Use Global Print Settings"=00000001
D:"Operating System"=00000000
S:"Time Zone"=
S:"Last Directory"=
S:"Initial Local Directory V2"=
S:"Default Download Directory V2"=
D:"File System Case"=00000000
S:"File Creation Mask"=
D:"Disable Directory Tree Detection"=00000002
D:"Verify Retrieve File Status"=00000002
D:"Resolve Symbolic Links"=00000002
B:"RemoteFrame Window Placement"=0000002c
 2c 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 fc ff ff ff fc ff ff ff 00 00 00 00
 00 00 00 00 00 00 00 00 00 00 00 00
S:"Remote ExplorerFrame State"=1,-1,-1
S:"Remote ListView State"=1,1,1,0,0
S:"SecureFX Remote Tab State"=1,-1,-1
D:"Restart Data Size"=00000000
S:"Restart Datafile Path"=
D:"Max Transfer Buffers"=00000004
D:"Filenames Always Use UTF8"=00000000
D:"Use A Separate Transport For Every Connection"=00000000
D:"Use Multiple SFTP Channels"=00000000
D:"Disable STAT For SFTP Directory Validation"=00000000
D:"Disable MLSX"=00000000
D:"SecureFX Trace Level"=00000001
D:"SecureFX Use Control Address For Data Connections"=00000001
D:"Use PGP For All Transfers"=00000000
D:"Disable Remote File System Watches"=00000000
D:"[SSH1] Port"=000008ae
S:"[SSH1] Key Exchange Algorithms"=rsa-ssh1
D:"[SSH1] Use Global Host Key Algorithms"=00000001
S:"[SSH1] Host Key Algorithms"=ssh-rsa,ssh-ed25519,ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,null,x509v3-sign-rsa,x509v3-ssh-rsa,x509v3-sign-dss,x509v3-ssh-dss,ssh-dss
S:"[SSH1] Cipher List"=blowfish-cbc,3des-cbc,arcfour,des-cbc
S:"[SSH1] MAC List"=crc32
S:"[SSH1] Authentications V2"=password,publickey,tis-firewall
S:"[SSH1] Compression List"=none
D:"[SSH1] Compression Level"=00000005
D:"[SSH1] Use Global Public Key"=00000001
S:"[SSH1] Identity Filename V2"=
D:"[SSH1] Public Key Type"=00000000
D:"[SSH1] Public Key Certificate Store"=00000000
S:"[SSH1] PKCS11 Provider Dll"=
S:"[SSH1] Public Key Certificate Serial Number"=
S:"[SSH1] Public Key Certificate Issuer"=
S:"[SSH1] Public Key Certificate Username"=
D:"[SSH1] Use Username From Certificate"=00000000
D:"[SSH1] Certificate Username Location"=00000000
D:"[SSH1] Use Certificate As Raw Key"=00000001
S:"[SSH1] GSSAPI Method"=auto-detect
S:"[SSH1] GSSAPI Delegation"=full
S:"[SSH1] GSSAPI SPN"=host@$(HOST)
Z:"Port Forward Table V2"=00000000
Z:"Reverse Forward Table V2"=00000000
Z:"Keymap v4"=00000000
Z:"Description"=00000001
 Extreme switch
Z:"SecureFX Post Login User Commands"=00000000
Z:"SecureFX Bookmarks"=00000000
Z:"SCP Shell Prompts"=00000001
 "? ",0,"\n"
Reply With Quote
  #2  
Old 05-31-2018, 07:55 AM
bgagnon bgagnon is offline
VanDyke Technical Support
 
Join Date: Oct 2008
Posts: 3,997
Hi rualexy,

No, clearly the configured protocol *is* SSH1:

S:"Protocol Name"=SSH1

Quote:
When conneting to him, it write, that i try to connect by SHH2 protocol.
Please post the error message you are receiving. I believe you are just misinterpreting it.

If it reads:

The client has disconnected from the server. Reason:
Protocol version mismatch. Required protocol version is 1.3 - 1.99. Received version was 2.0.


The above error means you have configured SSH1 as the protocol in SecureCRT but the remote server requires SSH2.
__________________
Thanks,
--Brenda

VanDyke Software
Technical Support
support@vandyke.com
(505) 332-5730
Reply With Quote
  #3  
Old 06-01-2018, 12:45 AM
rualexy rualexy is offline
Registered User
 
Join Date: May 2018
Posts: 2
Hi bgagnon!
You absolutly right! 1000 apologies for false anxiety. Everything works as it should.
Reply With Quote
  #4  
Old 06-01-2018, 08:13 AM
bgagnon bgagnon is offline
VanDyke Technical Support
 
Join Date: Oct 2008
Posts: 3,997
Hi rualexy,

No worries, I have been confused by that wording many times.

For completeness, here's the wording you might get if you have SSH2 configured and the remote requires SSH1:

The client has disconnected from the server. Reason:
Protocol version mismatch. Required protocol version is 2.0. Received version was 1.5-1.2.26

Have a great weekend!
__________________
Thanks,
--Brenda

VanDyke Software
Technical Support
support@vandyke.com
(505) 332-5730
Reply With Quote
Reply

Tags
connecting , problem , ssh1


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 10:24 PM.