Welcome to the VanDyke Software Forums

Join the discussion today!


Go Back   VanDyke Software Forums > General

Reply
 
Thread Tools Display Modes
  #1  
Old 10-24-2019, 11:35 AM
teggenberger teggenberger is offline
Registered User
 
Join Date: May 2014
Posts: 15
Ubuntu Serial Port usage

I have a desktop PC running Ubuntu 18.4. The PC has a DB-9 Serial port on the back and i'm trying to connect direct to a piece of hardware console port.

The Port is recognized on Ubuntu as:
Code:
teggenbe@teggenbe:~$ dmesg | grep tty
[ 0.000000] console [tty0] enabled
[ 0.801726] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
However, when i try to connect using SercureCRT i see this:
Code:
Unable to open serial port /dev/ttyS0:
  Permission denied
I've tried different speeds and 'flow control' but always get the same message.
Is there a setting somewhere i'm missing?
I even tried to add 'sudo' in the pre-connect properties option.

Thanks
Reply With Quote
  #2  
Old 10-24-2019, 04:24 PM
berdmann berdmann is offline
VanDyke Technical Support
 
Join Date: Aug 2017
Posts: 386
Hi teggenberger,

SecureCRT makes a call to the system to open the serial port when a serial connection is made. So it is likely that the behavior is a result of a configuration issue on the machine. This theory is also supported by the "Permission denied" error that you are seeing. SecureCRT is not allowed to prohibit or grant access to operating system level functions.

Is your user account a member of the dialout group listed for your console cable?

We had a customer report similiar behavior in the past and he provided the following steps:

1. Confirm that /dev/ttyS0 is member of the dialout group using:
Code:
        ls -l /dev/ttyS0
2. Make your user account a member of the dialout group using:
Code:
        sudo adduser <username> dialout
3. Reboot using:
Code:
        sudo reboot
__________________
Thanks,
--Brittney

VanDyke Software
Technical Support
support@vandyke.com
(505) 332-5730
Reply With Quote
  #3  
Old 09-30-2020, 10:41 AM
MelliLewis MelliLewis is offline
Registered User
 
Join Date: Sep 2020
Posts: 1
Hello....I had the option to get the sequential port to work, in any event to some degree. I found that the sequential port must be empowered in the profiles. My machine has two COM ports and a Parallel port in the BIOS. Nonetheless, there is just a single physical COM port and one physical equal port (except if I'm missing something). I empowered one and attempted to interface by means of sequential port. The product is as yet incapable to associate with it. It tossed a mistake saying that I needed to guarantee that the baud rate is right just as have it set to 8-n-1 (8 pieces, no equality bit, 1 stop bit). After some looking, I found that I can arrange the port in this manner by giving
Reply With Quote
  #4  
Old 09-30-2020, 01:29 PM
jjh jjh is offline
VanDyke Customer Support
 
Join Date: Feb 2004
Posts: 815
Hello MelliLewis

Your post appears to be incomplete.

Can you tell me more about the nature of the problem you are experiencing?

Which product are you using?

What is the problem that you are trying to solve?

What configuration settings do you have in place?

What is the platform?

Thank you

JJH
Reply With Quote
Reply

Tags
comport , console , serial , ubuntu


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 12:09 AM.