View Single Post
  #1  
Old 08-27-2014, 03:09 PM
jgolden73 jgolden73 is offline
Registered User
 
Join Date: Jan 2012
Posts: 6
Question Secure FX 7.3 beta xfer issue

Hello, hopefully I am posting to the right spot.

I just installed the latest Secure FX 7.3 beta 2 and attempting to use SCP to upload a new .bin file to my Cisco 1861 router. Logging in worked, see the flash worked, deleting the existing bin file worked. However uploading I get an error. Can someone assist?

Here is the some of the log:

i Transfer(00000001): Using protocol SSH2
i Transfer(00000001): RECV : Remote Identifier = 'SSH-2.0-Cisco-1.25'
i Transfer(00000001): CAP : Remote can re-key
i Transfer(00000001): CAP : Remote sends language in password change requests
i Transfer(00000001): CAP : Remote sends algorithm name in PK_OK packets
i Transfer(00000001): CAP : Remote sends algorithm name in public key packets
i Transfer(00000001): CAP : Remote sends algorithm name in signatures
i Transfer(00000001): CAP : Remote sends error text in open failure packets
i Transfer(00000001): CAP : Remote sends name in service accept packets
i Transfer(00000001): CAP : Remote includes port number in x11 open packets
i Transfer(00000001): CAP : Remote uses 160 bit keys for SHA1 MAC
i Transfer(00000001): CAP : Remote supports new diffie-hellman group exchange messages
i Transfer(00000001): CAP : Remote correctly handles unknown SFTP extensions
i Transfer(00000001): CAP : Remote correctly encodes OID for gssapi
i Transfer(00000001): CAP : Remote correctly uses connected addresses in forwarded-tcpip requests
i Transfer(00000001): CAP : Remote can do SFTP version 4
i Transfer(00000001): CAP : Remote uses SHA1 hash in RSA signatures for x.509v3
i Transfer(00000001): CAP : Remote x.509v3 uses ASN.1 encoding for DSA signatures
i Transfer(00000001): CAP : Remote correctly handles zlib@openssh.com
i Transfer(00000001): SSPI : Requesting full delegation
i Transfer(00000001): SSPI : [Kerberos] SPN : host@
i Transfer(00000001): SSPI : [Kerberos] InitializeSecurityContext() failed.
i Transfer(00000001): SSPI : [Kerberos] The specified target is unknown or unreachable
i Transfer(00000001): SSPI : [Kerberos] Disabling gss mechanism
i Transfer(00000001): GSS : Requesting full delegation
i Transfer(00000001): GSS : [Kerberos] SPN : host@
i Transfer(00000001): GSS : [Kerberos] InitializeSecurityContext() failed.
i Transfer(00000001): GSS : [Kerberos] Could not load library 'gssapi64.dll': The specified module could not be found.
i Transfer(00000001): GSS : [Kerberos] Disabling gss mechanism
i Transfer(00000001): GSS : [Kerberos] Disabling gss mechanism
i Transfer(00000001): The following key exchange method has been filtered from the key exchange method list because it is not supported: gss-group1-sha1-toWM5Slw5Ew8Mqkay+al2g==
i Transfer(00000001): SSPI : Requesting full delegation
i Transfer(00000001): SSPI : [Kerberos (Group Exchange)] SPN : host@
i Transfer(00000001): SSPI : [Kerberos (Group Exchange)] InitializeSecurityContext() failed.
i Transfer(00000001): SSPI : [Kerberos (Group Exchange)] The specified target is unknown or unreachable
i Transfer(00000001): SSPI : [Kerberos (Group Exchange)] Disabling gss mechanism
i Transfer(00000001): GSS : Requesting full delegation
i Transfer(00000001): GSS : [Kerberos (Group Exchange)] SPN : host@
i Transfer(00000001): GSS : [Kerberos (Group Exchange)] InitializeSecurityContext() failed.
i Transfer(00000001): GSS : [Kerberos (Group Exchange)] Could not load library 'gssapi64.dll': The specified module could not be found.
i Transfer(00000001): GSS : [Kerberos (Group Exchange)] Disabling gss mechanism
i Transfer(00000001): GSS : [Kerberos (Group Exchange)] Disabling gss mechanism
i Transfer(00000001): The following key exchange method has been filtered from the key exchange method list because it is not supported: gss-gex-sha1-toWM5Slw5Ew8Mqkay+al2g==
i Transfer(00000001): SEND : KEXINIT
i Transfer(00000001): RECV : Read kexinit
i Transfer(00000001): Available Remote Kex Methods = diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1
i Transfer(00000001): Selected Kex Method = diffie-hellman-group14-sha1
i Transfer(00000001): Available Remote Host Key Algos = ssh-rsa
i Transfer(00000001): Selected Host Key Algo = ssh-rsa
i Transfer(00000001): Available Remote Send Ciphers = aes128-cbc,3des-cbc,aes192-cbc,aes256-cbc
i Transfer(00000001): Selected Send Cipher = aes256-cbc
i Transfer(00000001): Available Remote Recv Ciphers = aes128-cbc,3des-cbc,aes192-cbc,aes256-cbc
i Transfer(00000001): Selected Recv Cipher = aes256-cbc
i Transfer(00000001): Available Remote Send Macs = hmac-sha1,hmac-sha1-96,hmac-md5,hmac-md5-96
i Transfer(00000001): Selected Send Mac = hmac-sha1
i Transfer(00000001): Available Remote Recv Macs = hmac-sha1,hmac-sha1-96,hmac-md5,hmac-md5-96
i Transfer(00000001): Selected Recv Mac = hmac-sha1
i Transfer(00000001): Available Remote Compressors = none
i Transfer(00000001): Selected Compressor = none
i Transfer(00000001): Available Remote Decompressors = none
i Transfer(00000001): Selected Decompressor = none
i Transfer(00000001): Changing state from STATE_EXPECT_KEX_INIT to STATE_KEY_EXCHANGE
i Transfer(00000001): SEND : KEXDH_INIT
i Transfer(00000001): RECV : KEXDH_REPLY
i Transfer(00000001): Changing state from STATE_KEY_EXCHANGE to STATE_READY_FOR_NEW_KEYS
i Transfer(00000001): RECV: Remote Hostkey (SHA-1 hash):

i Transfer(00000001): RECV: Remote Hostkey (MD5 hash):

i Transfer(00000001): SEND : NEWKEYS
i Transfer(00000001): Changing state from STATE_READY_FOR_NEW_KEYS to STATE_EXPECT_NEWKEYS
i Transfer(00000001): RECV : NEWKEYS
i Transfer(00000001): Changing state from STATE_EXPECT_NEWKEYS to STATE_CONNECTION
i Transfer(00000001): SEND: SERVICE_REQUEST[ssh-userauth]
i Transfer(00000001): RECV: SERVICE_ACCEPT[ssh-userauth] -- OK
i Transfer(00000001): SENT : USERAUTH_REQUEST [none]
i Transfer(00000001): RECV : USERAUTH_FAILURE, continuations [keyboard-interactive,password]
i Transfer(00000001): SENT : USERAUTH_REQUEST [password]
i Transfer(00000001): RECV : AUTH_SUCCESS
i Transfer(00000001): SEND[0]: SSH_MSG_CHANNEL_OPEN('session')
i Transfer(00000001): SEND[0]: exec request: scp -t flash:/c1861-advipservicesk9-mz.124-24.GC5.bin
i Transfer(00000001): RECV[0]: exec request succeeded
i Transfer(00000001): File c1861-advipservicesk9-mz.124-24.GC5.bin could not be opened by server: Administratively disabled.//
i Transfer(00000001): SUMMARY: Attempted to transfer 1 files.
i Transfer(00000001): SUMMARY: Transferred 0 files successfully.
i Transfer(00000001): SUMMARY: c1861-advipservicesk9-mz.124-24.GC5.bin: Unable to open destination file.
i SEND[0]: cd flash:/
i RECV[0]: sgcc-dallas-vg#cd flash:/
i SEND[0]: pwd
i RECV[0]: remote process exit-status: 0
i RECV[0]: channel eof
i SEND[0]: SSH_MSG_CHANNEL_EOF
i RECV: TCP/IP close
i Changing state from STATE_CONNECTION to STATE_CLOSED
i Connected for 0 seconds, 1464 bytes sent, 1407 bytes received
i Resolved RealPath: flash:/
i RECV[0]: sgcc-dallas-vg#pwd
i RECV[0]: flash:/


I had to resort to TFTP which is crawling along right now. I look forward to making this work as I have 6 other routers, and this is much easier than using TFTP.

Thanks!
Reply With Quote